Loading ...
Loading ...
Loading ...
271
Mobile Phone won’t pair to system:
Perform a hard reset in the mobile phone by
removing the battery (if removable — see
your mobile phone’s owner manual).
Delete pairing history in mobile phone and
Uconnect system; usually found in phone’s
Bluetooth connection settings.
Verify you are selecting “Uconnect” in the
discovered Bluetooth devices on your mobile
phone.
If your vehicle system generates a pin code
the default is 0000.
Mobile Phonebook didn’t download:
Check “Do not ask again,” then accept the
“phonebook download” request on your
mobile phone.
Up to 5,000 contact names with four
numbers per contact will transfer to the
Uconnect 4C/4C NAV system phonebook.
Can’t make a conference call:
CDMA (Code-Division Multiple Access)
carriers do not support conference calling.
Refer to your mobile phone user’s manual for
further information.
Making calls while connected to AUX:
Plugging in your mobile phone to AUX while
connected to Bluetooth will disable
Hands-Free Calling. Do not make calls while
your mobile phone is plugged into the AUX
jack.
VOICE RECOGNITION
QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with
these helpful quick tips. It provides the key
Voice Commands and tips you need to know
to control your Uconnect system.
If you see the NAV icon on the bottom bar, or
in the Ap
ps menus, of your touchscreen, you
have the Uconnect 4C NAV With 8.4–inch
Display or the Uconnect 4C NAV With
12–inch Display system. If not, you have a
Uconnect 4C With 8.4–inch Display system.
Get Started
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
1. Visit UconnectPhone.com to che
ck mobile
device and feature compatibility and to find
phone pai
ring instructions.
2. Reduce background noise. Wind noise and
passenge
r conversations are examples of
noise that may impact recognition.
3. Speak clearly at a normal pace and volume
while fa
cing straight ahead. The micro-
phone is located in the headliner and
a
imed at
the driver.
4. Each time you give a Voice Command, you
must fir
st push either the VR or Phone
button, wait until after the beep, then say
your Voice Command.
5. You can interrupt the help message or
system p
rompts by pushing the VR or
Phone button and saying a Voice Command
from current category.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call,
S
end Or R
eceive A Text
2 — For All Radios: Push To Begin Radio Or Me-
dia Functions. For 4C/4C NAV Only: Push To Be-
gin Navigation, Apps And Climate Functions
3 — Push To End Call
Loading ...
Loading ...
Loading ...