Loading ...
Loading ...
Loading ...
149
To Manually Turn Off The Stop Start
System
1. Push the STOP/START Off switch
(located near the gear selector). The light
on the switch will illuminate.
STOP/START OFF Switch
2. The STOP/START OFF message will
appear i
n the instrument cluster display.
Refer to “Instrument Cluster Display” in
“Getting To Know Your Instrument
Panel” for further information.
3. At the next vehicle stop (after turning off
the STOP
/START system) the engine will
not be stopped.
4. If the STOP/START system is manually
turned o
ff, the engine can be started and
stopped by cycling the ignition switch or
pressing the STOP/START switch again.
5. The STOP/START system will reset itself
back to
an ON condition every time the
key is turned off and back on.
To Manually Turn On The Stop Start
System
1. Push the STOP/START Off switch
(located near the gear selector module).
2. The light on the switch will turn off.
System Malfunction
If there is a malfunction in the STOP/START
system, the system will not shut down the
engine. A “SERVICE STOP/START SYSTEM”
message will appear in the instrument
cluster display. Refer to “Instrument Cluster
Display” in “Getting To Know Your Instru
-
ment Panel” for further information.
The system will need to be checked by your
a
uthorize
d dealer.
SPEED CONTROL — IF
EQUIPPED
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
20
mph (32 km/h).
The Speed Control buttons are located on the
right sid
e of the steering wheel.
Speed Control Buttons
1 — CANC/Cancel
2 — On/Off
3 — SET (+)/Accel
4 — RES/Resume
5 — SET (-)/Decel
Loading ...
Loading ...
Loading ...