Loading ...
Loading ...
Loading ...
Safety Instructions
18
Hazard Distance
• During projection, looking into the lens from distances closer than this poses a
risk of vision impairment or other serious injury.
• When a projection lens with a hazard distance indicated on it is used with the
projector, the operator shall either install the product at a height that will prevent
eye exposure within the hazard distance or control access to ensure that persons
do not approach within the hazard distance.
Laser Light Source
• The projector is designated as a Class 1 laser product according
to IEC/EN 60825-1:2014.
• The equipment is designated as a Class 3R laser product
according to IEC/EN 60825-1:2007.
• Complies with FDA performance standards for laser products
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
• Laser parameters
Wavelength: 450 nm – 460 nm
Maximum power: 144 W
Beam divergence: 2°
• The projector incorporates a laser module. Disassembly or
modification is dangerous and must not be attempted.
• Operate and adjust the projector only as described in this
manual. Incorrect operation or adjustment poses a risk of
exposure to potentially hazardous laser light.
• Do not use when damaged. Even if the projector is used as
described in this manual, failure to discontinue use when it is
damaged (as indicated by screen abnormalities) may result in
fire, electric shock, or eye injury from laser light.
• For assistance when disposing of the projector, contact the
Canon Customer Support Center. Do not disassemble the
projector yourself when disposing of it.
• Do not attempt to install or remove the lens unit yourself. Be sure
to request this service from a qualified technician or contact the
Canon Customer Support Center.
Loading ...
Loading ...
Loading ...