Loading ...
Loading ...
Loading ...
171
Menu Description
Menu Guide Menu Description
Standby power setting
Specify network function operating status in standby mode.
Option Function
Normal
All network functions are available when network functions are
enabled, including the web screen and PJLink.
Low-power
All functions are disabled except for some wired LAN functions (such
as operations over a network).
Quick startup
Enable faster startup next time by leaving some circuits on for 90 minutes after the projector is
turned off. However, to avoid sudden surges in intensity, projection is delayed by at least
approximately 1.7 seconds.
Option Function
Off Disable quick startup.
On Enable quick startup.
Power management mode
Specify to turn the light source off or enter standby if there is no input signal. This feature
automatically turns off the light source or power after a certain period if the remote control or
projector is not operated.
Option Function
Disabled Disable power management mode.
Light source off Only turns the light source off.
Standby Turns the projector off and puts it in standby.
• [Standby power setting] is set to [Normal] and cannot be changed when scheduling
is enabled (P176).
• [Standby power setting] is set to [Normal] and cannot be changed when wireless
LAN is enabled (P184).
• [Standby power setting] is set to [Normal] and cannot be changed when IPsec
function is enabled (P214).
• Projection resumes when the same input signal is restored, when the remote control
or projector is operated, or when user commands are sent to turn the projector on.
• After the projector enters standby, restoring projection requires the same steps as
when turning the projector on normally.
• When [Disabled] is selected, [Direct power on] is not available.
Loading ...
Loading ...
Loading ...