Loading ...
Loading ...
Loading ...
Using the Projector on a Network
176
Sending a Test Mail
You can send a test mail to the mail address specified in [Mail] under [Mail] in the
settings screen by clicking [Send test mail] at the bottom of the screen.
SNMP Settings [SNMP]
From [SNMP] in the settings screen, you can configure the settings related to
control of projectors which use SNMP (Simple Network Management Protocol). For
the setting procedure, refer to “Network Setting” (P161).
Item Explanation Factory default setting
SNMP Select the SNMP function version. If
OFF is selected, the other settings in
this screen cannot be configured.
OFF
Receive community Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 - 15 characters).
<Blank>
Password Enter the community settings password
in 1-byte alphanumeric characters and
symbols (8 - 15 characters). It can be
set only when the SNMP version is V3.
<Blank>
Confirm password For confirmation, enter the same
password as you entered in [Password].
<Blank>
Loading ...
Loading ...
Loading ...