Loading ...
Loading ...
Loading ...
Menu Settings
138
Connections
• The following network features are available in infrastructure mode.
- Web features
- Mail features
- User commands
Other network features (specifically, SNMP, PJLink, AMX Device Discovery and
Crestron RoomView) are not available.
• The following restrictions apply in infrastructure mode.
- Access point SSIDs not in ASCII code (single-byte letters, numbers, or
symbols) may cause character corruption in search result display.
- Connectivity cannot be assured if access point SSIDs include characters not in
ASCII code (single-byte letters, numbers, or symbols).
When multiple access points have the same SSID, only search results for the
access point with the strongest signal are shown.
• Remember to set your preferred network (wired or wireless) to [On] if [Network
(wired/wireless)] on the projector is set to [Off/Off] and the network connection is
disabled. (P142) For wireless networks, choose the type of connection.
• Referring to “Checking Projector Information” (P155), confirm that the projector’s
wired or wireless IP address is not the same as that of other computers on the
network. To set a projector IP address, follow the instructions in “Completing
Computer Settings for a Network Connection” (P157) and use the web screen, or
use projector TCP/IP settings. (P144, P149)
• Before connecting to a network environment that uses a DHCP server, set
[DHCP] in the menu to [On] to enable the DHCP function. (P143, P149)
• Wired LAN features and infrastructure mode cannot be used at the same time.
• PJ AP and infrastructure modes cannot be used at the same time.
• Wired LAN and PJ AP mode cannot be used in the same subnetwork.
• When you connect the computer to the network for the first time, it is also necessary to
perform settings on the computer. In this case, consult the network administrator
regarding the necessary settings.
Loading ...
Loading ...
Loading ...