Loading ...
Loading ...
Loading ...
175
Using the Projector on a Network
Advanced Guide Using the Projector on a Network
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Mail Authentication Settings
From [Mail auth] under [Mail] in the settings screen, you can configure the settings
for authentication of mail that is sent when an error occurs. For the setting
procedure, refer to “Network Setting” (P161).
IPv6 SMTP server IP
address
Enter the SMTP server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 SMTP server port
number
Enter the SMTP server port number
(IPv6) in 1-byte numbers (1 - 65535).
25
Mail resend interval* Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 - 59 seconds using
1-byte numbers.
10
Mail resend times Enter the number of times to resend
mail when an error occurred within the
range of 0 - 255 using 1-byte numbers.
3
Item Explanation Factory default setting
Mail authentication Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
OFF
User name Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
Password Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
Confirm password For confirmation, enter the same
password as you entered in
[Password].
<Blank>
IPv4 POP3 server IP
address
Enter the POP3 server IP address
(IPv4) in 1-byte numbers.
0.0.0.0
IPv4 POP3 server port
number
Enter the POP3 server port number
(IPv4) in 1-byte numbers (1 - 65535).
110
IPv6 POP3 server IP
address
Enter the POP3 server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 POP3 server port
number
Enter the POP3 server port number
(IPv6) in 1-byte numbers (1 - 65535).
110
POP before SMTP
response time
Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
300
Item Explanation Factory default setting
Loading ...
Loading ...
Loading ...