Loading ...
Loading ...
Loading ...
113
Menu Settings
Advanced Guide Menu Settings
Marginal focus
In dome projection, image focus can be adjusted on the edges of the screen, and the remote
control can be used to activate and deactivate this focus adjustment. For detailed instructions,
refer to “Adjusting Peripheral Focus” (P191).
Option Function
Off Disable remote focusing of image edges.
On
Enable remote focusing of image edges. To access the adjustment
window, press the LENS button on the projector twice or press the
FOCUS button on the remote twice.
Reset Restore edge focusing to the standard position.
Edge blending
Brightness and colors of overlapping edges of images from multiple projectors, which form a
blending area, can be adjusted for a more seamless appearance. For detailed instructions, see
“Projecting from Multiple Projectors at Once (Edge Blending)” (P183).
[Off] Disable blending.
[Adjust] Display the menu for blending area adjustment.
Setting this function to [Off] only prevents display of the adjustment window.
Adjustment values are still retained. Use this setting to prevent remote focusing of
image edges.
Start marker End marker
Blending area
When adjusting the image
projected from the right side
• Adjustment may not eliminate different colors or brightnesses in the blending area.
• For best edge-blending results, use all projectors in the same image mode (Optimal
image mode: [Photo/sRGB].) and make the following adjustments.
(1) Brightness, contrast, R/G/B gain, R/G/B offset, black level, color blending, color
temperature, color level, color balance, sharpness, gamma, HDR range, light source
mode, brightness level
(2) Color adjustment, by using 6-axis color adjustment
(3) Gamma adjustment, by fine-tuning gamma
(4) Corner adjustment, using keystone correction
Loading ...
Loading ...
Loading ...