Loading ...
Loading ...
Loading ...
Menu Settings
110
DVI optimizer
Optimizes images from DVI signals.
Submenu Option Function
DVI dual link auto
setting
Off
Disable automatic determination of single- or dual-link
mode from DVI terminals, and project images in single-
link mode.
On
Automatically determine whether DVI terminals are used
in single- or dual-link mode and switch settings
accordingly.
Option Function
DVI-1 equalizer
setting
Adjust the equalizer value for DVI terminals.
Choose lower values for higher amplification, or higher values for lower
amplification.
Example of equalizer settings
• Decrease values to amplify signals that have been attenuated by a
long cable.
• Signals may be too strong if noise occurs when using a short cable, or
when using an active cable, signal corrector, or repeater. If so, increase
values to attenuate and correct the signals.
DVI-2 equalizer
setting
DVI-3 equalizer
setting
DVI-4 equalizer
setting
HDMI EDID mode select
Select an HDMI terminal (1 or 2) EDID that is compatible with connected equipment.
Submenu Function
HDMI-1 EDID
mode
HDMI-2 EDID
mode
• When a dual-link cable is used, any noise in the signal line may prevent normal
projection. If this occurs, set [DVI dual link auto setting] to [Off].
• In some cases when DVI terminals are used, the cable may not be a good match for
the projector, which may cause video noise or prevent the signal from being
detected. If this occurs, adjust values in each setting from [DVI-1 equalizer setting] to
[DVI-4 equalizer setting].
Option Function
Wide
bandwidth
(4K60Hz)
Select when connected equipment can supply high-
bandwidth signals such as 3840 x 2160 (4K) at 60 Hz,
YCbCr 4:4:4.
High
compatibility
Select in case of incorrect video or audio output from
the projector because the EDID is not read correctly by
connected equipment when set to Wide bandwidth
(4K60Hz).
Even if this function is used, the list of supported video formats may not be updated
when [HDMI input mode] in [Multi input mode select] is set to [HDMI 1x2].
Loading ...
Loading ...
Loading ...