Loading ...
Loading ...
Loading ...
– Only use accessories that have been
determined to be safe for attachment
to a head restraint.
– Do not use any accessories, for in-
stance pillows, while driving.
Adjusting the height: John Cooper
Works sport seat
The height of the head restraints cannot be
adjusted.
Adjusting the height
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Removing: John Cooper Works
sport seat
The head restraints cannot be removed.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
1. If necessary, fold the rear seat backrest
forward.
2. Pull head restraint up as far as possible.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Rear head restraints
Safety information
Warning
A missing protective effect due to re-
moved or not correctly adjusted head re-
straints can cause injuries in the head and
neck area. There is a risk of injury.
– Before driving, install the removed
head restraints on the occupied seats.
– Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
– Adjust the distance so that the head
restraint is as close as possible to the
back of the head. Adjust the distance
via the backrest tilt as needed.
Seite 85
Seats, mirrors, and steering wheel CONTROLS
85
Online Edition for Part no. 01402667273 - VI/19
Loading ...
Loading ...
Loading ...