Loading ...
Loading ...
Loading ...
Brake Assistant function, you must apply
the brakes quickly and forcefully. If there is
a risk of collision, the system may assist
with braking. When the vehicle is traveling
at a low speed, the vehicle may come to a
complete stop.
Manual transmission: during a braking in-
tervention up to a complete stop, the engine
may be shut down.
The braking intervention occurs only if ve-
hicle stability has not been restricted,
for instance by deactivating the DSC Dy-
namic Stability Control.
The driver may interrupt the braking inter-
vention function by stepping on the acceler-
ator pedal or by actively moving the steer-
ing wheel.
The system’s ability to detect objects may
be limited in some circumstances. Refer to
the information in this Owner’s Manual re-
garding the limitations of the system and
actively intervene as warranted.
System limits
Safety information
Warning
The system is designed to operate in cer-
tain conditions and circumstances. Due to
conditions or other factors, the system
may not respond. There may be a risk of
accident or risk of damage to property. Ac-
tively intervene as warranted. Refer to the
information in this Owner’s Manual re-
garding the scope of the system’s opera-
tion and limitations.
Detection range
The system's detection potential is limited.
Thus, a system reaction might not come or
might come late.
The following situations may not be de-
tected, for example:
– Slow moving vehicles when you ap-
proach them at high speed.
– Vehicles that suddenly swerve in front
of you, or sharply decelerating vehicles.
– Vehicles with an unusual rear appear-
ance.
– Two-wheeled vehicles ahead of you.
Functional limitations
The system may not be fully functional in
the following situations:
– In heavy fog, wet conditions, or snow-
fall.
– In tight curves.
– If the field of view of the camera or the
windshield is dirty or covered.
– If the driving stability control systems
are deactivated, for instance DSC OFF.
– Up to 10 seconds after the start of the
engine via the Start/Stop button.
– During calibration of the camera imme-
diately after vehicle delivery.
– If there are constant blinding effects be-
cause of oncoming light, for instance
from the sun low in the sky.
Warning sensitivity
The more sensitive the warning settings
are, the more warnings are displayed.
Therefore, there may also be an excess of
premature or unjustified warnings and reac-
tions.
Seite 157
Safety CONTROLS
157
Online Edition for Part no. 01402667273 - VI/19
Loading ...
Loading ...
Loading ...