Loading ...
Loading ...
Loading ...
Closing
– Pull the switch to the resistance
point.
The window closes while the switch is
being held.
– Pull the switch beyond the resist-
ance point.
The window closes automatically if the
door is closed. Pulling the switch again
stops the motion.
– Pull the switch.
All side windows close simultaneously
while the switch is being held.
Convenient closing with the vehicle key, re-
fer to page 62.
Closing via Comfort Access, refer to
page 67.
Jam protection system
Concept
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while the front windows
are being closed.
General information
If resistance or a blockage is detected while
the front windows are being closed, the
closing action is interrupted.
The window opens slightly.
Safety information
Warning
Accessories on the windows such as an-
tennas can impact jam protection. There is
a risk of injury. Do not install accessories
in the area of movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as
follows:
1. Pull the switch past the resistance
point and hold it there.
The window closes with limited jam pro-
tection. If the closing force exceeds a
specific threshold, closing is inter-
rupted.
2. Pull the switch past the resistance
point again within approx. 4 seconds
and hold it there.
The window closes without jam protec-
tion.
Malfunction
General information
In certain situations a window can only be
operated to a limited extent.
– After a power failure during the opening
or closing process, the a window can
only be operated to a limited extent. The
system must be initialized in this case.
– The power window motors are equipped
with overheating protection. If a win-
dow is opened and closed several times
within a short period of time, the over-
heating protection switches the motor
off temporarily. Depending on the de-
gree of overheating, it may only be pos-
sible to close the window or it may not
be possible to operate it at all.
In this case: allow the power window
motor to cool down.
Seite 74
CONTROLS Opening and closing
74
Online Edition for Part no. 01402667273 - VI/19
Loading ...
Loading ...
Loading ...