Loading ...
Loading ...
Loading ...
Warning
If the jumper cables are connected in the
incorrect order, sparking may occur. There
is a risk of injury. Pay attention to the cor-
rect order during connection.
NOTICE
In the case of body contact between the
two vehicles, a short circuit can occur dur-
ing jump-starting. There is a risk of dam-
age to property. Make sure that no body
contact occurs.
Preparation
1. Check whether the battery of the other
vehicle has a voltage of 12 volts. The
voltage information can be found on the
battery.
2. Switch off the engine of the assisting
vehicle.
3. Switch off any electronic systems/power
consumers in both vehicles.
Starting aid terminals
The starting aid terminal in the engine com-
partment acts as the battery's positive ter-
minal.
Open the cover of the starting aid terminal.
The body ground or a special nut acts as the
battery negative terminal.
Connecting the cables
To prevent personal injury or damage to
both vehicles, adhere strictly to the follow-
ing procedure.
1. Pull off the lid of the starting aid termi-
nal.
2. Attach one terminal clamp of the posi-
tive jumper cable to the positive termi-
nal of the battery, or to the correspond-
ing starting aid terminal of the vehicle
providing assistance.
3. Attach the terminal clamp on the other
end of the cable to the positive terminal
of the battery, or to the corresponding
starting aid terminal of the vehicle to be
started.
4. Attach one terminal clamp of the nega-
tive jumper cable to the negative termi-
nal of the battery, or to the correspond-
ing engine or body ground of assisting
vehicle.
5. Attach the second terminal clamp to the
negative terminal of the battery, or to
the corresponding engine or body
ground of the vehicle to be started.
Seite 304
MOBILITY Breakdown assistance
304
Online Edition for Part no. 01402667273 - VI/19
Loading ...
Loading ...
Loading ...