Loading ...
Loading ...
Loading ...
Screw thread for tow fitting
Threaded holes for the tow fitting are lo-
cated in the front and rear of the vehicle on
the right side with respect to the direction
of travel.
Press on the mark on the edge of the cover
to push it out.
Tow-starting
Steptronic transmission
Do not tow-start the vehicle.
Tow-starting the engine is not possible due
to the Steptronic transmission.
Have the reasons for the starting difficulties
corrected by a dealer’s service center or an-
other qualified service center or repair
shop.
Manual transmission
If possible, do not tow-start the vehicle but
start the engine by jump-starting, refer to
page 303. If the vehicle is equipped with a
catalytic converter, only tow-start while the
engine is cold.
1. Switch on the hazard warning system
and comply with local regulations.
2. Switch on the ignition, refer to page 94.
3. Engage third gear.
4. Have the vehicle tow-started with the
clutch pedal pressed and slowly release
the pedal. After the engine starts, imme-
diately press on the clutch pedal again.
5. Stop at a suitable location, remove the
tow bar or rope, and switch off the haz-
ard warning system.
6. Have the vehicle checked by a dealer's
service center or another qualified serv-
ice center or repair shop.
Seite 308
MOBILITY Breakdown assistance
308
Online Edition for Part no. 01402667273 - VI/19
Loading ...
Loading ...
Loading ...