Loading ...
Loading ...
Loading ...
02 Locks and alarm
Alarm
02
72
The alarm system
The alarm is automatically armed whenever
the vehicle is locked with the remote key or
optional Personal Car Communicator.
When armed, the alarm continuously moni-
tors a number of points on the vehicle. The
following conditions will trigger the alarm:
•
The hood is forced open.
•
The tailgate is forced open.
•
A door is forced open.
•
The ignition slot is tampered with.
•
An attempt is made to start the vehicle
with a non-approved key (a key not
coded to the car's ignition).
•
The battery is disconnected (while the
alarm is armed).
•
The siren is disconnected when the alarm
is disarmed.
A message will appear in the information dis-
play if a fault should occur in the alarm sys-
tem. Contact a trained and qualified Volvo
service technician.
NOTE
Do not attempt to repair any of the compo-
nents in the alarm system yourself. This
could affect the insurance policy on the
vehicle.
The alarm indicator light
The status of the alarm system is indicated by
the red indicator light on the dashboard (see
illustration):
•
Indicator light off: the alarm is not armed
•
The indicator light flashes at one-second
intervals: the alarm is armed
•
The indicator light flashes rapidly before
the remote key is inserted in the ignition
slot and the ignition is put in mode I: the
alarm has been triggered.
Arming the alarm
– Press the Lock button on the remote key.
One long flash of the turn signals will con-
firm that the alarm is armed.
Alarm confirmation settings can be changed
in MY CAR, under
Car settings Lock
settings
Keyless entry. See page 199 for
a description of the menu system.
USA FCC ID: MAYDA 5823(3)
This device complies with part 15 of the FCC
rules. Operation is subject to the following
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired opera-
tion.
Canada IC: 4405A-DA 5823(3)
This device is subject to the following condi-
tions: (1) this device may not cause interfer-
ence, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
Loading ...
Loading ...
Loading ...