Loading ...
Loading ...
Loading ...
04 Driver support
Rear Park Assist Camera (PAC)*
04
* Option/accessory, for more information, see Introduction.
187
Using PAC
Activation
PAC is activated when the gear selector is
moved to R if the system is selected in the
MY CAR menu system or by pressing the
CAM button in the center console. See page
199 for a description of the menu system.
If the Volvo Navigation System (VNS) is in
use, PAC will automatically override the navi-
gation system to show the camera's image
on the screen instead of navigation informa-
tion, for as long as reverse gear is selected.
Deactivation
Move the gear selector from R to another
position. There is a slight delay in the PAC
system, which means that the view from
behind the vehicle will remain on the screen
for approximately 15 seconds after the gear
selector has been moved from the R position
or until the vehicle reaches a forward speed
of 6 mph (10 km/h). The screen will then
revert to the mode that it was in before R was
selected and will, for example, display navi-
gation system information.
NOTE
If any button on the center console control
panel is pressed, the camera image will
disappear from the display. Pressing CAM
will return the camera image to the display.
Guiding lines
The lines on the screen are projected as if
they were a path on the ground behind the
vehicle and are affected by the way in which
the steering wheel is turned. This enables the
driver to see path the vehicle will take, even if
he/she turns the steering wheel while backing
up.
NOTE
When backing up with a trailer, the guiding
lines show the path that the vehicle will
take, not the trailer.
WARNING
Keep in mind that the image on the screen
only shows the area behind the vehicle.
The driver must always watch for people,
animals, other vehicles, etc., near the sides
of the vehicle when turning while backing
up.
Loading ...
Loading ...
Loading ...