User Manual - Page 128

For 2014 XC70.

Loading ...
Loading ...
Loading ...
03 Your driving environment
Transmission
03
126
* Option/accessory, for more information, see Introduction.
Neutral: position N
No gear is engaged and the engine can be
started with the gear selector in this position.
Apply the parking brake if the vehicle is sta-
tionary with the gear selector in position N.
Drive: position D
D is the normal driving position. The car auto-
matically shifts between the various forward
gears, based on the level of acceleration and
speed. The car must be at a standstill when
shifting from position R to position D.
Geartronic: manual shifting (+S–)
Geartronic allows you to manually shift
among your vehicle's forward gears. Gear-
tronic can be selected at any time.
To shift gears manually, move the
gear selector to the side from D
toward +S–. The +S– symbol in the
instrument panel will change from
white to orange and the number of the gear
currently being used (
1, 2, 3, etc.) will be dis-
played (see the following illustration).
To return to automatic shifting mode from
+S–, move the gear selector to the side
toward D.
Gear shift indicator*
Gear shift indicator in a digital instrument panel*
1
This option indicates when to shift up or
down to help conserve fuel. A white arrow will
appear above or below the number of the
current gear to prompt the driver to shift up
or down.
While driving
If you select the manual shifting position
while driving, the gear that was being
used in the Drive position will also initially
be selected in the manual shifting posi-
tion.
Move the gear selector forward (toward +)
to shift to a higher gear or rearward
(toward ) to shift to a lower gear.
If you hold the gear selector toward "–",
the transmission will downshift one gear
at a time and will utilize the braking power
of the engine. If the current speed is too
high for using a lower gear, the downshift
will not occur until the speed has
decreased enough to allow the lower gear
to be used.
If you slow to a very low speed, the trans-
mission will automatically shift down.
Shiftlock: Neutral (N)
If the gear selector is in the N position and
the vehicle has been stationary for at least
3 seconds (irrespective of whether the engine
is running) then the gear selector is locked.
In order to move the gear selector from N to
another gear position, the brake pedal must
be depressed and the ignition must be in at
least position II, see page 86.
Geartronic: steering wheel paddles*
In addition to the manual gearshift function
using the gear selector, this option makes it
possible to manually shift gears from the
steering wheel.
1
Analog instrument panel: the gear shift indicator is displayed in the center of the speedometer
Loading ...
Loading ...
Loading ...