Loading ...
Loading ...
Loading ...
04 Driver support
Cruise control
04
146
Operation
Steering wheel-mounted controls and display
Standby mode
Resume set speed
Deactivating
Activate/set speed
Selected speed (gray symbol indicates
standby mode)
Cruise control active: white symbol (gray
symbol indicates standby mode)
Engaging the cruise control function
Before a speed can be set, the cruise control
system must be engaged (put in standby
mode).
– Press the CRUISE button (1).
>
The symbol
illuminates and the text
(---) mph (5) indicates that cruise con-
trol is in standby mode.
NOTE
•
Putting cruise control in standby mode
does not set a cruising speed.
•
When cruise control is in standby
mode, the driver's seat belt must be
fastened before a cruising speed can
be set.
Setting a speed
Use the or buttons set the vehicle's
current speed. The set speed is shown in the
display.
NOTE
Cruise control cannot be engaged at
speeds below 20 mph (30 km/h).
Adjusting the set speed
After a speed has been set, it can be
increased or decreased by using the
or
buttons.
1.
Press and hold down
or until the
vehicle reaches the desired speed.
> This will become the set speed when
the button is released.
2.
Press
or for approximately a half
second and release the button to
increase or decrease vehicle speed by
approximately 1 mph (1.6 km/h).
NOTE
•
A temporary increase in speed by
pressing the accelerator pedal, for less
than 1 minute (e.g. when passing
another car), does not affect the cur-
rent cruise control setting. The vehicle
will automatically return to the previ-
ously set speed when the accelerator
pedal is released.
•
If one of the cruise control buttons is
kept depressed for more than approx.
1 minute cruise control is disengaged.
The engine must then be switched off
in order to reset cruise control.
Loading ...
Loading ...
Loading ...