Loading ...
Loading ...
Loading ...
04 Driver support
Rear Park Assist Camera (PAC)*
04
* Option/accessory, for more information, see Introduction.
189
These lines are affected by movements of
the steering wheel. The vehicle's approxi-
mate outer dimension are shown by two
dashed lines.
•
The graphic lines will not be displayed
when backing up with a trailer that is con-
nected to the vehicle's electrical system.
•
Objects on the ground that are closer
than 1 ft (30 centimeters) cannot be
detected by the camera.
•
The camera is active for approx.
5 seconds after the gear selector is
moved to R or until the vehicle's speed
exceeds 6 mph (10 km/h).
•
The optional Park Assist sensors and the
parking camera work together and infor-
mation from the sensors is shown graphi-
cally on the display.
•
The graphic lines shown on the screen
when the vehicle backs up can be disa-
bled in the settings menu.
•
The system can be switched off by press-
ing CAM. By default, the system is acti-
vated when the gear selector is moved to
R. This setting can be changed in the MY
CAR menu.
•
If there are two cameras installed on the
vehicle*, to switch between cameras, turn
TUNE (at least one of the cameras has to
be active), press CAM repeatedly or use
the center console controls. If the front
camera is on, it overrides the optional
park assist system's visual indicator but
there will still be an audible signal.
Limitations
Even if a fairly small section of the screen
image appears to be obstructed, this may
mean that a relatively large area behind the
vehicle is hidden and objects there may not
be detected until they are very near the vehi-
cle.
NOTE
Bicycle carriers or other accessories
mounted on the tailgate may obstruct the
camera's field of view.
Keep in mind
•
Keep the camera's lens free of dirt, ice
and snow. Remove ice and snow care-
fully to avoid scratching the lens.
•
Clean the lens regularly with warm water
and a suitable car washing detergent.
Loading ...
Loading ...
Loading ...