Loading ...
Loading ...
Loading ...
07 During your trip
Loading
07
286
Moving the load anchoring hooks
G017742
To move a hook, fold it down in the direc-
tion in which its opening points.
Press the hook down lightly and move it
to the desired position.
Fold up the hook. It will lock in place.
NOTE
There should be at least 2 in. (50 cm)
between the hooks in the rail.
WARNING
Switch off the engine, apply the parking
brake and put the gear selector in P when
loading and unloading the vehicle.
Removing a hook
G018134
The load-securing hooks can easily be
removed, for example, to clean the rail.
To remove a hook, fold it down in the
direction in which its opening points.
Press the hook down lightly and move the
it to an opening in the rail.
Pull the hook straight up.
Replace a hook in the rail in the reverse order.
NOTE
In order to return a removed hook into a
rail, it must be pressed down lightly.
Reinserting a hook
G019581
Upper illustration: hooks correctly installed,
Lower illustration: hooks incorrectly installed
It is important to insert the hooks correctly in
the rails. The hooks' openings should point
away from each other.
•
The opening on the hook closest to the
rear seat backrest should point toward
the backrest.
•
The opening on the hook closest to the
tailgate should point toward the tailgate.
WARNING
The hooks must be installed correctly in
the rail. Incorrectly installed hooks will be
folded down by the strap, allowing them to
move. The load will then no longer be
securely anchored.
Loading ...
Loading ...
Loading ...