Loading ...
Loading ...
Loading ...
Scan (Macintosh)
81
6
X-Offset / Y-Offset / Width / Length
You can adjust the scan area manually using the following values:
X-Offset
Adjusts the distance from the left edge of the scanner to the left edge of the area in the document that you
want to scan.
Y-Offset
Adjusts the distance from the top edge of the document to the top edge of the area in the document that
you want to scan.
Width
Adjusts the width of the area in the document that you want to scan.
Length
Adjusts the length of the area in the document that you want to scan.
Multi-Feed Detection options
Configure the Multi-Feed Detection options to detect documents that overlap when fed through the ADF.
A multifeed usually occurs due to stapled documents, adhesives on documents, or electrostatically charged
documents.
Additional Length Detection
Allows you to define the length of document being scanned by specifying the additional length exceeding
scan area. A value of “0” indicates no additional length detection. Use the Additional Length Detection
feature when scanning multiple same-sized documents from the ADF.
If you select this detection method, scanning does not stop even if a multifeed is detected.
Ultrasonic Detection
Detects overlapping pages by measuring paper thickness.
When this feature is selected, and your machine detects a multifeed, scanning stops immediately and
a warning message appears on your computer monitor.
Stop Scanning after Multi-Feed
Select this check box to stop the feeder and display the warning dialog box when a multifeed is detected.
NOTE
• This option is available when you select Additional Length Detection.
• To stop scanning immediately when a multifeed is detected, select the Stop Scanning after Multi-Feed
check box.
Multi-Feed Alarm
Use this feature to set an audible alarm emitted when a multifeed is detected.
To change the alarm sound, click Browse... and select a wave file from your computer.
NOTE
This feature is available when either Additional Length Detection or Ultrasonic Detection is selected.
Reload Timeout
Set the amount of time the machine has to wait before auto-scanning the next document after the scan job is
completed. Use this feature if you load many separate documents, which must be scanned using the same
scan settings, in the ADF.
Loading ...
Loading ...
Loading ...