Loading ...
Loading ...
Loading ...
EN - 70
HDMI
1.
Select a desired Item using [ / ] , then
press [ OK ].
Setup
Video / Audio
Display
HDMI
Playback / Recording
Network
Software
Other
HDMI Video Resolution • Auto
HDMI Audio Out • On
• Sub Menu will appear.
2.
Set the selected Item in references below.
Note(s)
• Settings for HDMI is only available when there is HDMI
Connection.
HDMI Video Resolution
Selects an HDMI output mode.
HDMI Connection makes this Unit automatically output the
most suitable resolution for your TV.
1.
Select a desired Item using [ / ] , then
press [ OK ].
Auto: Optimum setting will be selected.
480p: Sets HDMI resolution to 480 Progressive
720p: Sets HDMI resolution to 720 Progressive
1080i: Sets HDMI resolution to 1080 Interlaced
1080p: Sets HDMI resolution to 1080 Progressive
• The HDMI mode that is Not Supported by the
Display Device will be Skipped.
Note(s)
• When the HDMI Video Resolution is set to “Auto” or
“1080p”, Video signals are not output from the Video Out
jack depending on your TV.
HDMI Audio Out
If you do not wish to Output the Audio through HDMI, you can
set the HDMI Audio Output Off.
1.
Select a desired Item using [ / ] , then
press [ OK ].
• Set to “Off” when the HDMI Sound is Not Output.
On: Outputs the Audio from HDMI.
Off: Mutes the Audio from HDMI.
• Your Setting will be Activated.
Playback / Recording
1.
Select a desired Item using [ / ] , then
press [ OK ].
Setup
Video / Audio
Display
HDMI
Playback / Recording
Network
Software
Other
Variable Skip • 30 Seconds
Variable Replay • 10 Seconds
Auto Chapter • 10 Minutes
• Sub Menu will appear.
2.
Set the selected Item in references below.
Variable Skip / Replay
Assign [ SKIP ] or [ REPLAY ] to Skip or Rewind by a
certain amount of Time when they are pressed during
Playback.
1.
Select a desired Item using [ / ] , then
press [ OK ].
■
Variable Skip
Sets the amount of Skip time for [ SKIP ].
5 Seconds: Sets the amount of Skip time to 5 Seconds.
10 Seconds: Sets the amount of Skip time to 10 Seconds.
30 Seconds: Sets the amount of Skip time to 30 Seconds.
1 Minute: Sets the amount of Skip time to 1 Minute.
5 Minutes: Sets the amount of Skip time to 5 Minutes.
■
Variable Replay
Sets the amount of Rewind time for [ REPLAY ].
5 Seconds: Sets the amount of Rewind time to
5 Seconds.
10 Seconds: Sets the amount of Rewind time to
10 Seconds.
30 Seconds: Sets the amount of Rewind time to
30 Seconds.
1 Minute: Sets the amount of Rewind time to 1 Minute.
5 Minutes: Sets the amount of Rewind time to
5 Minutes.
Continued on next page.
EEC30UHPhilipsSmartDVRv1EN.indb70EEC30UHPhilipsSmartDVRv1EN.indb70 2013/09/1315:39:092013/09/1315:39:09
Loading ...
Loading ...
Loading ...