MX-2310U User Manual

Loading ...

7-72

SYSTEM SETTINGS

Contents

Disabling Deletion of Job Programs

This is used to prohibit the deletion and changing of copy

settings stored in job programs.

Disabling of Bypass-Tray in

Duplex Copy

This is used to prohibit the use of the bypass tray when

making two-sided copies.

The bypass tray is often used to feed label sheets,

transparency film, and other special media for which

two-sided copying is prohibited. If a sheet of one of these

special media enters the reversing unit, a misfeed or

damage to the unit may result. If special media for which

two-sided copying is prohibited is often used, it is

recommended that you enable this setting.

Disabling of Auto Paper Selection

This setting is used to disable the Auto Paper Selection

function.

When this setting is enabled, automatic selection of

paper that is the same size as the original on the

document glass or in the automatic document feeder

does not take place.

Auto Selection Setting of Tray that

is Supplied the Paper

When this setting is enabled and paper is loaded in a

tray while the machine is on standby in copy mode, that

tray is automatically selected.

B/W 600dpi x 600dpi Scanning

Mode for Document Feeder

The resolution for copying in black and white using the

automatic document feeder can be changed from 600 x

400 dpi to 600 x 600 dpi (high quality mode).

When high quality mode is used, fine print and thin lines

are reproduced with greater clarity, however, the

scanning speed is slower.

B/W Quick Scan from Document

Glass

The resolution for copying in black and white using the

document glass can be changed from 600 x 600 dpi to

600 x 300 dpi (high speed mode).

When high speed mode is selected, the first copy time is

quicker, however, the copy image is not as clear.

Auto Clear Before Copy Job

Execution

When configuring copy settings, Auto Clear can be

activated even if the copy job is not complete.

This prevents situations whereby the machine is left

unattended with an uncompleted copy job.

When high quality mode is not selected, the following

conditions must be satisfied in order to scan at 600 x

400 dpi and attain the fastest speed.

• The copy ratio must be set to 100%.

• Do not select a special mode that will change the

ratio.

• [Copy of Copy] must not be enabled.

• Do not copy in black and white with the [COLOR

START] key.

When high speed mode is selected, the following