Loading ...
Loading ...
Loading ...
7-61
SYSTEM SETTINGS
Contents
Energy Save
The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce
pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings.
Toner Save Mode
(When the printer expansion kit is installed.)
You can reduce the amount of toner used for printing.
Auto Power Shut-Off
This setting enables or disables Auto Power Shut-Off.
Remove the checkmark if you prefer that Auto Power
Shut-Off does not operate.
When the set duration of time elapses after printing
ends, Auto Power Shut-Off activates and causes to
machine to go on standby at a minimal level of power
consumption.
This function reduces your power costs, and at the same
time helps conserve natural resources and reduce
pollution.
It is recommended that you understand the objective
behind the energy save functions and instead of using
the machine in the state where the Auto Power Shut-Off
function is disabled, adjust the settings such that the
time till Auto Power Shut-Off is enabled is a little longer
or set a time zone for Auto Power Shut-Off. (Settings
that depend on the usage conditions, such as the time till
Auto Power Shut-Off is enabled can be configured in the
following "Auto Power Shut-Off Timer".)
Auto Power Shut-Off Timer
Settings that depend on the usage conditions, such as
the time till Auto Power Shut-Off is enabled or the time
zone for Auto Power Shut-Off can be configured. In case
of "Fix transition time", it can be set to "Earliest" or within
a range of 1 to 240 minutes.
When "As soon as the remote job is finished, enter Auto
power shut off mode" is enabled, Auto Power Shut-Off
happens in a short while after the print job or fax
reception is complete.
In case of settings that depend on the usage conditions,
select "Change transition time by time of day".
As per the default settings, the time zone is set
automatically depending on the application conditions of
the machine. When it is to be selected manually, you can
select from the following.
• All Day "Energy Save Priority2" : To be set when you
want Auto Power Shut-Off to be enabled in minimum
time in any time zone.
• 8:00-18:00 "Energy Save Priority1": To be set when
this machine is to be used more frequently in this time
zone than other time zones.
• 8:00-18:00 "Job Start Priority1": To be set when the
frequency of use of this machine in this time zone is
significantly more.
• Settings edited to match the usage conditions,
combining the three patterns given above can also be
selected.
Preheat Mode Setting
The time until Preheat Mode activates can be set to any
number of minutes from 1 to 240.
Preheat Mode will activate when the set duration of time
elapses after printing ends and no further operations are
performed. This function reduces your power costs, and
at the same time helps conserve natural resources and
reduce pollution.
Select the time that best suits the needs of your
workplace.
[Print] in Toner Save Mode is only effective when the
machine's printer driver is not used. When the printer
driver is used, the printer driver setting takes
precedence.
This function may not operate in some applications
and operating systems.
Print
data
Print example
when "Toner
Save Mode"
is enabled
Preheat mode cannot be disabled.
Loading ...
Loading ...
Loading ...