Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
9
MATRICE 200
SERIES V2 User Manual
Only use battery slot B when using one battery to supply power. In this case, the aircraft
can only be powered on, but cannot take off.
If for any reason only one battery is available during ight, land the aircraft immediately
and replace the batteries as soon as possible. In this case, the gimbal connectors and
the ports at rear of the aircraft cannot supply power to their connected devices.
Make sure to use the included TB55 batteries. DO NOT use any other type of batteries.
Removing the Intelligent Flight Battery
Make sure to press the battery removal button when removing the battery.
Preparing the Remote Controller
For M210 V2 / M210 RTK V2
Mounting Monitor and Remote Controller Batteries
CRYSTALSKY
TM
monitors and the remote controller use the same batteries.
Put the battery into the Battery Slot, then slide it to the end until you hear a click.
Press the Battery Release Button before removing the battery.
Press the Battery Level Button once to check the battery level.
Mounting the Monitor to the Remote Controller
Low
High
Lock the Mounting
Bracket.
Use a coin or the
screwdriver included to
adjust the tightness of
the tilt axis.
Ensure that Part B is
unlocked. Connect
Part B to Part A.
A
B
Loading ...
Loading ...
Loading ...