Dji MATRICE 200 SERIES V2 User Manual

Loading ...

MATRICE 200

SERIES V2 User Manual

Mounting the Control Stick Covers

1. Remove the rings around the sticks with the Control Stick Cover Mounting Key, and the screws on

the top of the sticks.

2. Mount the Control Stick Covers to the remote controller and secure them with the Control Stick

Cover Mounting Key.

3. Reattach the screws to the sticks.

The two Control Stick Covers are not the same, and neither are the two rings around the

sticks. The left and right Control Stick Covers and rings can be distinguished using the

gures below. Be sure to install each Control Stick Cover on the correct side.

Press the C1 and C2 buttons and the Start/Stop button for fast linking.

Ensure the r emote controller is within 1.6 ft (0.5 m) of the air craft during linking.

The remote controller will unlink itself from an aircraft if a new remote controller links to the

same aircraft.

In Dual Remote Controller Mode, the Assistant remote controller must also be relinked to

the aircraft when the Primary remote controller is relinked to the aircraft.

Loading ...

Dji MATRICE 200 SERIES V2