Dji MATRICE 200 SERIES V2 User Manual

Loading ...

Remote Controller

Remote Controller Prole

The CENDENCE

S remote controller features DJI’s OcuSync 2.0 technology for a maximum

transmission distance of up to 5 mi (8 km).* Equipped with a DJI CrystalSky 7.85 inch ultra-bright

monitor, it displays a HD live view directly via the built-in DJI Pilot app, providing a precise and

responsive flying experience. Or equipped with a mobile device with a mobile device holder to

download the DJI Pilot app. Dual frequency* support makes the HD video downlink more stable. In Dual

Remote Controller Mode, two remote controllers control the aircraft and camera separately, even when

they are up to 656 feet (200 m) apart.*

The remote controller works with a WB37 Intelligent Battery, which can be fully charged via the charging

port in about 2 hours with the standard charger, or with the Intelligent Battery Charging Hub in about 1

hour and 11 minutes. The maximum run time of the remote controller is approximately 4 hours without

supplying power to a monitor and with Dual Remote Controller mode disabled.*

* The remote controller can reach its maximum transmission distance (FCC) in an unobstructed area with

no electro-magnetic interference at an altitude of about 400 feet (120 meters). The actual maximum

transmission distance may be less than the distance mentioned above due to interference in the operating

environment, and the actual value will uctuate according to the strength of interference.

Note that the CrystalSky is excluded in the M200 V2.

To comply with local regulations, the 5.8 GHz frequency is not available in some countries and regions.

The Dual Remote Controller mode will be supported later.

Maximum run time is estimated in a lab environment without supplying power to a smart device or monitor,

for reference only.

Compliance Standards: The remote controller is compliant with local laws and regulations.

Stick Mode: Controls can be set to Mode 1, Mode 2, or to a custom mode.

Mode 1: The right stick serves as the throttle.

Mode 2: The left stick serves as the throttle.

Please refer to the CrystalSky User Guide for more CrystalSky details.

Do not operate more than three aircraft within the same area (roughly the size of a soccer

eld) to prevent transmission interference.

Preparing the Remote Controller

Mounting/Removing the Intelligent Battery

Put the battery into the Battery Slot, then slide it to the end until you hear a click.

Press the Battery Release Button before removing the battery.

Press the Battery Level Button once to check the battery level.

Loading ...

Dji MATRICE 200 SERIES V2