Dji MATRICE 200 SERIES V2 User Manual

Loading ...

MATRICE 200

SERIES V2 User Manual

1. System Status Bar

READY TO GO (GPS)

: This icon indicates aircraft ight status and displays various warning messages.

2. Obstacle Detection Status

: Red bars are displayed when obstacles are close to the aircraft. Orange or

yellow bars are displayed when obstacles are within the detection range.

3. Battery Level Indicator Bar

: The battery level indicator provides a dynamic display of the battery level. The

colored zones on the battery level indicator represent the power levels needed to carry out

different functions.

4. Flight Mode

: The text next to this icon indicates the current ight mode.

Tap to congure the Flight Controller settings. These settings allow you to modify ight limits

and set gain values.

5. AirSense Status

: AirSense Status displays information about nearby manned aircraft to ensure ight safety,

including the distance between DJI aircraft and manned aircraft. AirSense will instruct users to

land if nearby aircraft are detected.

6. GPS Signal Strength

: Shows the current GPS signal strength. For the M210 RTK V2, “R” will be displayed on

the lower right corner if the aircraft RTK is enabled. For the M210 V2, “

” will be displayed

if the external GPS module is used together. (App version must be v1.5.0 or later)

7. Obstacle Sensing Function Status

: Tap this icon to enable or disable features provided by the Vision System, and it displays

the status for all vision systems.

8. Focus/Metering Button

: Tap to switch between the focus and metering modes. Tap to select an object for

focusing or metering. Auto Focus-Continuous will be triggered automatically according to the

status of the aircraft and camera after enabling Auto Focus.

9. Remote Controller Signal

: This icon shows the strength of the remote controller signal. The icon will blink when an

interference is recognized during ight. When there are no additional warnings in DJI Pilot, it

means that the interference will not affect operation and overall ight experience.

10. AF/MF

: Tap to switch the focus mode.

11. HD Video Link Signal Strength

2.4G

: This icon shows the strength of the HD video downlink connection between the aircraft

and the remote controller. The text on top indicates the frequency in use. Tap for image

transmission settings.

12. Zoom

: Tap to enter zoom mode. Tap the screen to zoom into the pre-set TapZoom value

automatically. Manual zoom can be done by tapping the icon to pull out the zoom menu.

13. Battery Settings

: Shows the current battery level. Tap to view the battery information menu, set the

various battery warning thresholds, and view the battery warning history.

Loading ...

Dji MATRICE 200 SERIES V2

User Manual - Page 56