Dji MATRICE 200 SERIES V2 User Manual

Loading ...

MATRICE 200

SERIES V2 User Manual

2. Click the corresponding device name and then the rmware update tag.

3. Select the rmware version required. Make sure to connect to the Internet when downloading the

rmware.

4. Restart the device after the rmware update is complete.

The battery rmware is included in the aircraft rmware. Be sure to update all the batteries'

rmware.

The rmware update will take around 15 minutes. It is normal that the gimbal will go limp, the

aircraft status indicator blinks abnormally when the aircraft reboots. Wait patiently until the

update is complete.

During an update, the aircraft will sound a quick single beep continuously. The warning

sound will then alternate between a longer beep and a quick double beep once the

update is complete. Restart the aircraft after the rmware update is complete.

If the warning sound turns into a long beep, retry the update.

The battery level should be above 30% for the rmware update process.

When using DJI Pilot to update, you may disconnect the aircraft and the mobile device

once the update is more than 30% completed. No Internet connection is required.

Using the Zenmuse XT Gimbal and Camera

The Zenmuse XT Gimbal Adapter is required when mounting the Zenmuse XT gimbal to the aircraft.

1. Attach the Zenmuse XT gimbal adapter onto the Zenmuse XT gimbal.

2. Mount the Zenmuse XT onto the aircraft by securing the gimbal adapter.

Loading ...

Dji MATRICE 200 SERIES V2