Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
13
MATRICE 200
SERIES V2 User Manual
33
34
35
36
37
38 39 40 41
42
43
44
45
46
4747
24. Aperture Setting Button
When using a Zenmuse X4S, X5S or X7, press
and rotate the Camera Setting Dial to set the
aperture.
25. ISO Setting Button
When using a Zenmuse X4S, X5S or X7,
press and rotate the Camera Setting Dial to
set the ISO.
26. Pause Button
Press once and the aircraft will brake and hover.
27. Power Button
Used to turn the remote controller on and off.
28. Remote Controller Display
Shows information about the aircraft and
camera.
29. Camera Setting Dial
When using an X4S, X5S, X7 or Z30, turn the
dial to adjust the EV. When using an XT2 or XT,
turn the dial to select palette.
When using a Zenmuse X4S, X5S or X7,
press the Shutter Setting Button /Aperture
Setting Button / ISO Setting Button and rotate
the Camera Setting Dial to adjust the Shutter
/ Aperture / ISO.
30. Customizable Button Settings Menu
Press to set Customizable Button functions in
the DJI Pilot app.
31. Customizable Buttons (BA-BH)
Customizable through the DJI Pilot app.
32. Support Rig
33. Left Lever
Reserved.
34. Left Dial (Gimbal Pitch)
Controls gimbal pitch.
35. Flight Mode Switch
Switch between P-mode, S-mode, and
A-mode.
36. Handle Bar
37. USB Port (for Mobile Device Connection)
Connection to mobile device for DJI Pilot app
if used a third party mobile device.
38. HDMI A Port (for Video Output)
Output HDMI signal to an HDMI monitor.
39. CAN Bus Port (Extension Port)
Reserved port used to connect external
devices.
40. Micro USB Port
Connect to the DJI Assistant 2 for Matrice to
update rmware.
41. SDI Port (for Video Output)**
Output SDI video signal.
42. Right Lever
Reserved.
43. Right Dial
Used to control gimbal pan.
44. Auto Focus Button
Press to focus automatically.
45. Record Button
Press to start recording video. Press again to
stop recording.
46. Shutter Button
Press to take a photo. Photos can also be
captured during video recording.
47. Customizable Buttons (C1-C4)
Customizable through the DJI Pilot app.
48. Mobile Device Holder
* Note that CrystalSky does not come with the M200 V2.
** For better image transmission, a 75Ω coaxial cable is
required for SDI video signal output. Make sure to use
a coaxial cable with good electromagnetic shielding
performance to avoid signal interference which will
degrade the flight distance. Additionally, disable the
video output in the Image Transmission Settings in the
app when the display device is disconnected.
Loading ...
Loading ...
Loading ...