Dji MATRICE 200 SERIES V2 User Manual

Loading ...

MATRICE 200

SERIES V2 User Manual

Extended Power Port (XT30)

Used to supply power for other device, whose voltage range is from 18 V to 26 V (the voltage

varies according to the aircraft battery level) with a current of 4 A. Make sure your device meets the

voltage and current requirement. The use of a device with a power that exceeds the maximum may

affect ight performance adversely or even cause aircraft damage.

USB Mode Switch

Power on the Intelligent Flight Battery and slide the USB Mode Switch right, and connect the USB

port on the aircraft to the computer via the USB to USB cable included in the package. Once

connected, you can access photos and videos in the microSD card (for the X4S, X5S, and X7), ight

records or congure aircraft parameters and run rmware updates using the DJI Assistant 2 for

Matrice. OSDK devices can also be connected to the USB port when the switch is slid to the right.

USB Port

The USB port is used to connect to a computer or OSDK devices. The corresponding devices can

be connected when the USB mode switch is slid to different positions. The USB port can supply

power with a maximum voltage of 5V and maximum current of 1A when the switch is slid to the left.

Linking Button and Indicator

Used to link between aircraft and remote controller, and the built-in LED will display the linking

status during linking procedure.

Expansion Ports

Components at the Rear of the Aircraft

M210 V2/M210 RTK V2 provides several I/O ports, which can be customized in the DJI Pilot app.

The aircraft also has components such as Extended Power Port, USB Mode Switch, Linking Button,

and USB Port.

1 2 3 4

M210 V2 / M210 RTK V2M200 V2*

* Note that the M200 V2 only has USB Mode Switch, Linking Button, and USB Port.

Loading ...

Dji MATRICE 200 SERIES V2