Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
19
MATRICE 200
SERIES V2 User Manual
Calibration
The Vision System cameras installed on the aircraft are factory calibrated. If the aircraft experiences
a collision, however, it may require calibration via DJI Assistant 2 for Matrice. Connect the aircraft to
a computer and calibrate the Vision System cameras when prompted in DJI Pilot.
1. Power on the Intelligent Flight Battery and slide the USB Mode Switch right.
2. Connect the aircraft and the PC with a USB to USB cable. The USB extension cable included in
the package can be used if the USB to USB cable is too short for connection.
3. Launch DJI Assistant 2 for Matrice and log in with a DJI account.
4. Click M200 V2 SERIES and the calibration button.
1
Point the aircraft toward the screen
2
Align the boxes
3
Pan and tilt the aircraft
Follow the steps below to calibrate the camera.
A note on the vision system and the ultrasonic sensor detection range is illustrated below.
There may be a ±2° error in the angle of the downward vision system and ultrasonic sensor due
to errors in the assembly process. To prevent accidents, please DO NOT attach any payload that
might be in the sensors’ Do Not Obstruct Zone. If the payload comes into the Do Not Obstruct Zone,
it is recommended to turn off the downward vision system in the Pilot app and y with caution.
2º 2º
Effective Detection Range
Do Not Obstruct Zone
Loading ...
Loading ...
Loading ...