Dji MATRICE 200 SERIES V2 User Manual

Loading ...

MATRICE 200

SERIES V2 User Manual

Operating the Camera

Shoot videos/photos with the Shutter Button and Video Recording Button on the remote controller.

1. Shutter Button

Press to take a photo. Photos can be taken even while recording video.

2. Video Recoding Button

Press once to start recording video, then press again to stop recording.

3. Autofocus button

Press once to focus automatically.

4. Focus Adjustment

Rotate Focus Adjustment Knob to set the focal length.

Controlling the FPV Camera

Press and hold C2 and turn the left dial to control the pitch of the FPV camera.

Conguring the Customizable Buttons

Go to the Customizable Button Settings Menu in DJI Pilot. Here you can set functions for the left C1-

C4 buttons, and BA-BH buttons.

Dual Remote Controller Mode

Introduction

Two remote controllers can connect to the same aircraft using Dual Remote Controller mode. The

master remote controller operator can control the orientation of the aircraft, gimbal movements and

camera operations, while the assistant remote controller can control the movement of the gimbal

and camera operations.

Only one remote controller can control the gimbal at a time.

When using the D-RTK 2 Mobile Station, Dual remote controller mode is not supported.

Setting up Dual Remote Controller Mode

Before using the Dual Remote Controller Mode, please congure the master and assistant remote

controllers separately by following the instructions below:

Loading ...

Dji MATRICE 200 SERIES V2