Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
31
MATRICE 200
SERIES V2 User Manual
3. Run the rmware update program. Press the update button and wait for the process to nish.
4. The Charging Hub will automatically restart when the update has been successfully completed.
5. Repeat this process if the rmware update fails for any reason.
Using the Battery
A
B
Low
High
Pairing Batteries
Before rst use, it is recommended to mark 2 batteries as a pair and continue using them as a pair
(charge and discharge them together) to maximize service life and ensure ight performance.
If two batteries with a signicant difference in battery life are installed and powered on, a prompt will
pop up in the app to recommend that you replace the batteries to a pair with similar performance.
Turning ON/OFF
Turning On: Press the Power button once, then press again and hold for two seconds to power on.
The Power LED will turn white and the Battery Level Indicators will display the current
battery level.
Turning Off: Press the Power button once, then press again and hold for two seconds to power off.
Heating the Battery
Manual Heating: If the Intelligent Flight Battery is not installed into the aircraft, press and hold the
battery level button on the battery for four seconds to initiate the self-heating, keeping the batteries
at a temperature between 61° F (16° C) and 68° F (20° C), which is the ideal range of operating
temperature, for approximately 30 minutes. Press and hold the battery level button for two seconds
to stop heating.
Auto Heating: Insert the batteries into the aircraft and power it on. If a low battery temperature is
detected, the battery will automatically heat up to maintain a temperature between 61° F (16° C)
and 68° F (20° C).
Low Temperature Notice:
1. The performance of the intelligent Flight Battery is significantly reduced when flying in low
temperature environments (temperatures below 5℃). Ensure that the battery is fully charged and
the cell voltage is at 4.35 V before each ight.
2. End the ight as soon as DJI Pilot displays the “Low Battery Level Warning” in low temperature
environments. You will still be able to control the aircraft’s movement when this warning is
triggered.
3. In extremely cold weather, the battery temperature may not be high enough even after warming
up. In these cases, insulate the battery as required.
4. To ensure optimal performance of the battery, keep the battery temperature above 16℃.
5. In low temperature environments, it will take a longer time for the batteries to warm up. It is
recommended to keep the battery warm before use to reduce the warm-up time.
Loading ...
Loading ...
Loading ...