Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
29
MATRICE 200
SERIES V2 User Manual
LED1
LED3
Battery Level Button
LED2
LED4
Always align the grooves on the Intelligent Flight Battery with the battery slot tracks. Make
sure the Status LED of the Charging Hub has a blinking pattern of charging or ready to
charge indicating that the battery is inserted correctly.
Press the release button to detach batteries after charging is complete.
DO NOT leave metal terminals exposed to open air when not in use.
Status LED Descriptions
Status LED (Charging Hub) Description
Blinks Green Charging
— Solid Green Fully charged
Blinks Red Battery Charger Error. Retry with an ofcial battery charger.
— Solid Red Intelligent Flight Battery error
Blinks Yellow
Battery temperature too high/low. Temperature must be within
operating range (5°-40
℃
)
— Solid Yellow Ready to charge
Alternating Green Blinks Intelligent Flight Battery not detected
Battery Level Indicators while Charging (Battery)
LED1 LED2 LED3 LED4 Battery Level
0%~50%
50%~75%
75%~100%
Fully Charged
Charging Protection LED Display
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level Indicators for Battery Protection
LED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item
LED2 blinks twice per second Over current detected
LED2 blinks three times per
second
Abnormal battery cell voltage
detected
Loading ...
Loading ...
Loading ...