Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
75
MATRICE 200
SERIES V2 User Manual
Upward Infrared Sensing System
Obstacle Sensing Range 0-16.4 feet (0-5 m)
FOV ±5°
Operating Environment Large, diffuse, and reective obstacles (reectivity >10%)
Intelligent Flight Battery (TB55-7660mAh-22.8V)
Capacity 7660 mAh
Voltage 22.8 V
Battery Type LiPo 6S
Energy 174.6 Wh
Net Weight (Single One) Approx. 885 g
Operating Temperature -4° to 122° F (-20° to 50° C)
Optimal Storage Temperature 72° to 86° F (22° to 30° C)
Charging Temperature 41° to 104° F (5° to 40° C)
Max Charging Power 180 W
Charger (IN2C180)
Voltage 26.1 V
Rated Power 180 W
Charging Hub (IN2CH)
Input Voltage 26.1 V
Input Current 6.9 A
Firmware Update
Use the DJI Pilot app or the DJI Assistant 2 for Matrice to update the remote controller, aircraft and
other connected DJI devices.
For the Zenmuse X5S, X4S and X7, the aircraft and gimbal rmware will be updated simultaneously
via DJI Assistant 2 for Matrice or the DJI Pilot app.
For the Zenmuse Z30, XT, XT S and XT2, only aircraft rmware can be updated via DJI Assistant 2
for Matrice or the DJI Pilot app. Gimbal rmware must be updated via a microSD card.
Using DJI Pilot
1. Ensure that there is good connection between the aircraft and remote controller and other DJI
devices used with the aircraft such as a D-RTK 2 Mobile Station for Matrice Series, and that all
the devices are powered on.
2. Go to the app. A prompt will appear if new firmware is available for download. Follow the
on-screen instructions to update the firmware. Make sure to connect to the Internet when
downloading the rmware.
Using DJI Assistant 2 for Matrice
Connect the remote controller to the software and then run a rmware update for all the connected
DJI devices. Users can also connect each device to the software to update its own rmware.
1. Power on the device and connect it to the software.
Loading ...
Loading ...
Loading ...