Loading ...
Loading ...
Loading ...
7
INSTRUCTIONS FOR USE
1. Put base on counter, with nameplate facing
you. Pick up work bowl, with handle facing
you, and place it on base with handle at
about 7 o’clock.
2. Turn work bowl counterclockwise until it
clicks.
3. Place metal blade over shaft matching
outline on top of hub to the same shape on
shaft. Lower blade will almost touch
bottom of bowl.
4. Put cover on work bowl, with feed tube at
about 7 o’clock. Turn cover counter-
clockwise until it fits into position.
5. The pusher assembly slides over the large
feed tube. It has a large pusher and a small
pusher. Push the small white pusher all the
way down until it twists it to lock. Push the
large pusher all the way down and push the
white Slide Lock right to lock.
6. Hold pusher with white Slide Lock toward
you. Slide pusher over feed tube on cover
and push locking tab down until locking tab
clicks. CAUTION: Machine must be
unplugged when you practice locking and
unlocking pusher. Repeated locking and
unlocking with machine plugged in is never
necessary in normal use and will make
machine inoperable.
7. Plug machine in. Move control switch to
ON position to start motor. Move control
switch down to OFF position to stop motor.
Move control switch to PULSE position and
release it for pulse/chopping. If machine
doesn’t start, make sure it is plugged in
and work bowl, cover and pusher assembly
are locked in position.
8. To remove cover, hold pusher assembly
with thumb away from two locking tabs.
Turn clockwise, and lift. The work bowl
won’t come off until the cover is unlocked.
INSTRUCTIONS FOR SLICING
AND SHREDDING
1. Lock bowl in place.
2. Place disc, cutting side down, on flat,
stable surface and hold it down firmly with
one hand. With other hand, line up two
symbols (o and Δ) on stem with similar
symbols on disc. Turn stem clockwise until
it clicks into position.
3. Place disc over shaft, matching outline on
its top to same shape on shaft. Without
touching blade edge, push disc down as
far as it will go.
4. Put cover on bowl, feed tube at 7 o’clock,
and turn clockwise until it clicks. Insert
food in feed tube.
5. Twist small pusher to lock it and push Slide
Lock to left to unlock pusher sleeve. Slide
large pusher sleeve over feed tube and
push all the way down until tabs click into
place.
6. Apply even pressure to large pusher while
holding lever down at PULSE position, and
push food through.
7. To remove pusher assembly, hold it with
thumb on large tab. Press firmly on tab and
lift straight up. Cover will stay in place,
allowing you to reload feed tube.
8. To remove disc from stem, slide button up
as far as it will go and turn stem counter-
clockwise.
Loading ...
Loading ...
Loading ...