Loading ...
Loading ...
Loading ...
Chapter 6 Wireless Tab
Multi-SSID Check the Enable box to use the Multi-SSID function.
Click Add in the table of Multi-SSID.
Create a wireless network name (
SSID
), a string from 1 to 32 characters.
Set the
VLAN
ID of wireless network identified by this SSID, and the value
ranges from 1 to 4094.
Select whether to broadcast this SSID or not.
Enable
AP Isolation
, the device would isolate the hosts within the same
wireless network. All the hosts cannot communicate with each other. The
default setting is Disable.
SSID Select the added SSID to configure its security mode.
Security Mode
If all the hosts are allowed to access the wireless network, select None.
For the safety of wireless network, you are suggested to encrypt your
wireless network. This device provides three security modes: WPA-PSK
(Pre-Shared Key), WPA (Wi-
Fi Protected Access) and WEP (Wired
Equivalent Privacy). WPA-PSK is recommended. Please refer to Security
Mode in the Wireless AP Settings section for further information.
Wireless MAC Filtering
Wireless MAC Filtering function uses MAC addresses to determine whether one host can access
the wireless network or not. Thereby it can effectively control the user access in the wireless
network. This function is available in all modes except the client mode.
- 78 -
Loading ...
Loading ...
Loading ...