Loading ...
Loading ...
Loading ...
Chapter 5 Network Tab
If you’ve made any change of the parameters, click Apply to make the configuration take effect.
There will be a blue bar at the top of the page to remind you to save the configuration. Click Save
Changes when you finish all settings, otherwise all the settings will be recovered to last saved
settings at reboot or power off.
WAN
NOTE:
WAN submenu is only available on AP router mode and AP client router (WISP Client) mode.
There are five WAN connection types: Static, Dynamic, PPPoE, L2TP, and PPTP. Select the
suitable one to configure the IP parameters of the WAN on the screen below. If you are not sure of
the connection type, please consult your ISP.
Static
This connection type uses a permanent, fixed (static) IP address that your ISP assigned. In this
type, you should fill in the IP address, Netmask, Gateway IP, and DNS IP address manually, which
are specified by your ISP.
- 44 -
Loading ...
Loading ...
Loading ...