Loading ...
Loading ...
Loading ...
Chapter 5 Network Tab
Connection
type
There is only one LAN Connection type Static in AP Router mode and AP Client
Router (WISP Client) mode. While there are Static and Dynamic of Connection types
in Access Point mode, Client mode, Repeater (Range Extender) mode and Bridge
mode.
IP Address Enter the IP address of your AP/router (factory default: 192.168.0.254).
Netmask Enter the Netmask provided by your ISP. Normally use 255.255.255.0 as the
netmask.
Gateway IP Enter the IP address of the gateway for your device.
Primary DNS Enter the primary DNS IP address provided by your ISP. Please consult your ISP if
you don’t know the DNS value. The factory default setting is 0.0.0.0.
Secondary
DNS
Enter the secondary DNS IP address of alternative DNS server if your ISP two DNS
servers. The factory default setting is 0.0.0.0.
IGMP Proxy IGMP (Internet Group Management Protocol) works for IPTV multicast stream. If you
want to watch IPTV, Enable it.
DHCP Server If the built-in DHCP server is expected to assign IP addresses to clients connected to
the wireless interface and LAN interface, Enable it.
- 52 -
Loading ...
Loading ...
Loading ...