Loading ...
Loading ...
Loading ...
Chapter 5 Network Tab
Fallback IP When Dynamic IP is selected as the connection type, you can enable this function.
The fallback IP will be used as the LAN IP when a DHCP server is not found.
DHCP
Fallback IP
Specify the IP address for the device to use if a DHCP server is not found.
DHCP
Fallback
Mask
Specify the mask for the device to use if a DHCP server is not found.
Start IP
Address
This field specifies the first address in the IP Address pool. 192.168.0.100 is the
default start IP address.
End IP
Address
This field specifies the last address in the IP Address pool. 192.168.0.199 is the
default end IP address.
Default
Gateway
Enter the IP address of the gateway for your LAN. The factory default setting is
192.168.0.254.
Default
Domain
Enter the domain name of your DHCP server. You can leave the field blank.
Primary DNS Enter the DNS IP address for the LAN. The factory default setting is 0.0.0.0.
Secondary
DNS
Enter the IP address of alternative DNS server if there are two DNS servers. The
factory default setting is 0.0.0.0.
Lease Time Enter the amount time of the leased IP address assigned by the DHCP server. Before
the time is up, DHCP client will request to renew the lease automatically and DHCP
server would not assign this IP address to other clients.
- 53 -
Loading ...
Loading ...
Loading ...