Loading ...
Loading ...
Loading ...
English 7
Important safety information
• Make sure your range is correctly installed and adjusted by a qualied service technician or
installer for the type of gas (natural or LP) you will use. For your range to utilize LP gas, the
installer must replace the 5 surface burner orices and 2 oven orices with the provided
LP orice set, and reverse the GPR adapter. These adjustments must be made by a qualied
service technician in accordance with the manufacturer’s instructions and all codes and
requirements of the authority having jurisdiction. The qualied agency performing this
work assumes the gas conversion responsibility.
• Installation of this range must conform with local codes or, in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation
must conform with the current Natural Gas Installation Code, CAN/CGA-B149.1, or the
current Propane Installation Code, CAN/CGA-B149.2, and with local codes where applicable.
This range has been design-certied by ETL according to ANSI Z21.1, latest edition, and
Canadian Gas Association according to CAN/CGA-1.1, latest edition.
LOCATION SAFETY
WARNING
To reduce the risk of re, electric shock, personal injuries, and/or death, obey the following
precautions.
• This range is for indoor, household use only.
Do not install the range in areas exposed to the
weather and/or water.
• Do not install the range in a place which is
exposed to a strong draft.
• Select a level, well-constructed oor that can
support the range’s weight. Synthetic ooring,
such as linoleum, must withstand 180 °F (82
°C) temperatures without shrinking, warping, or
discoloring. Do not install the range directly over
interior kitchen carpeting unless a sheet of ¼ inch
plywood or a similar insulator is placed between
the range and carpeting.
• Select a location where a grounded, 3- prong outlet is easily accessible.
• If the range is located near a window, do not hang long curtains or paper blinds on that
window.
• Electrical service to the range must conform to local codes. Barring local codes, it should
meet the latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian Electrical
Code CSA C22.1 – Latest Revisions.
• It is the personal responsibility of the range owner to provide the correct electrical service
for this range.
INSTALLATION SAFETY
WARNING
To reduce the risk of re, electric shock, personal injuries, and/or death, obey the following
precautions.
• Have your range installed and properly grounded
by a qualied installer, in accordance with the
installation instructions. Any adjustment and
service should be performed only by qualied gas
range installers or service technicians.
• Do not attempt to service, modify, or replace
your range or any part of your range unless it
is specically recommended in this manual. All
other service should be referred to a qualied
technician.
• Always use new exible connectors when installing a gas appliance. Do not use old exible
connectors.
• Make sure the anti-tip device is properly installed on the range. See the installation
instructions for more information.
• Due to the size and weight of the range, have two or more people move the range.
• Remove all tape and packaging materials.
• Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and griddles
are heavy. Use caution when handling them.
• Make sure no parts came loose during shipping. Do not install in an area exposed to
dripping water or outside weather conditions.
NX58J7750S_AA_AC_DG68-00623A-07_EN+CFR.indb 7 2018-08-30 12:21:50
Loading ...
Loading ...
Loading ...