Loading ...
Loading ...
Loading ...
40 English
Maintenance
Maintenance
4. Put the drawer in the roller guides on
either side, and then snap the clips into
place.
To re-install the oven door
1. Firmly grasp both sides of the door at
the top.
2. With the door set at the same angle as
the removal position (about 5 degrees
from vertical), slide the hinge arms into
the hinge slots at the bottom of the
door.
3. Open the door fully. If you cannot open
the door fully, the hinge arms are not
properly in the hinge slots.
4. Lock the hinge arms by pushing them
up against the front frame of the oven.
5. Close the door, and make sure it opens
and closes normally.
Storage drawer
1. Slide open the drawer until it stops.
2. Locate the roller guide clips on either
side. Using both hands, pull down the
left clip while lifting the right clip, and
then remove the drawer.
3. Clean the drawer in warm, soapy water
using a cloth or soft brush. Then, rinse
and dry it thoroughly.
NX58J7750S_AA_AC_DG68-00623A-07_EN+CFR.indb 40 2018-08-30 12:22:07
Loading ...
Loading ...
Loading ...