Loading ...
Loading ...
Loading ...
44 English
Troubleshooting
Troubleshooting
Others
Problem Possible cause Action
The product is
not level.
The appliance has been
installed improperly.
The leveling leg(s)
is (are) damaged or
uneven.
Make sure the oor is level, strong,
and stable. If the oor sags or
slopes, contact a carpenter.
Check and level the range. (See the
Installation Instructions.)
The kitchen cabinets
are not properly
aligned and make the
range appear to be not
level.
Ensure that cabinets are square
and provide sufcient room for
installation.
Display goes
blank.
The electrical
outlet Ground Fault
Interrupter (GFI or
GFCI) has been tripped
and needs to be reset.
Your digital control has
been damaged.
Replace fuse or reset circuit breaker.
Problem Possible cause Action
Burning or oily
odor coming
from the vent.
This is normal for a
new oven and will
disappear within 1/2
hour of the rst bake
cycle.
To speed the process, set a self-
cleaning cycle for a minimum of
3 hours. (See 38.)
Strong odor. This is temporary. The insulation around the inside of
the oven emits an odor the rst few
times the oven is used.
Oven racks are
difcult to slide.
This is normal. Apply a small amount of vegetable
oil to a paper towel and wipe the
edges of the oven racks with the
paper towel. Racks become dull and
hard to slide if they are left in the
oven during a self-clean cycle.
Fan noise. This is normal. The convection fan runs until the
function is over or the door is
opened.
Convection fan
is not working.
This is normal. The fan starts automatically when
the oven reaches the preheat
temperature.
NX58J7750S_AA_AC_DG68-00623A-07_EN+CFR.indb 44 2018-08-30 12:22:08
Loading ...
Loading ...
Loading ...