Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
95
Tunnel detection*
Tunnel detection changes the lighting from day-
time running lights to dipped beam when the car
is driven into a tunnel.
The tunnel detection function is available in cars
with rain sensor*. The sensor detects the
entrance to a tunnel and resets the lighting from
daytime running lights to dipped beam. Approx.
20 seconds after the car has left the tunnel, the
lighting returns to daytime running lights. If the
car is driven into another tunnel within this time
period then dipped beam is kept switched on.
This avoids repeated changes to the car's light-
ing.
Note that the headlamp control's knob must
remain in
position for tunnel detection to
work.
Related information
•
Main/dipped beam (p. 95)
•
Light switches (p. 92)
Main/dipped beam
With the knob for headlamp control in position
and the car's electrical system in key posi-
tion II or the engine running, the dipped beam is
activated automatically in poor light conditions.
Stalk switch and knob for headlamp control.
Position for main beam flash
Position for main beam
Dipped beam
With the knob in position, dipped beam is
activated automatically at twilight or when day-
light becomes too weak. Dipped beam is also
activated automatically if the windscreen wipers
or the rear fog lamps are activated.
With the knob in position
dipped beam is
always switched on when the engine is running
or when key position II is active.
Main beam flash
Move the stalk switch gently towards the steering
wheel to the position for main beam flash. Main
beam comes on until the stalk switch is released.
Main beam
Main beam can be activated when the knob is in
position
20
or
. Activate/deactivate
main beam by moving the stalk switch towards
the steering wheel to the end position and then
releasing. Alternatively, the main beam can be
deactivated by a light press of the stalk switch
toward the steering wheel.
When main beam has been activated the
symbol illuminates in the combined instrument
panel.
Auxiliary lamps*
If the car has auxiliary lamps, the driver can use
the MY CAR menu system to choose whether
they should be deactivated or switched on/off
simultaneously with the main beam
21
, see MY
CAR (p. 117).
20
When dipped beam is switched on.
21
Auxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop.
Loading ...
Loading ...
Loading ...