Loading ...
Loading ...
Loading ...
||
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.
202
the setting - the car returns to the last stored
speed when the accelerator pedal is released.
Automatic standby mode
Cruise control is temporarily disengaged and set
in standby mode if:
•
wheels lose traction
•
engine speed is too low/high
•
speed falls below 30 km/h (20 mph).
The driver must then regulate the speed.
Related information
•
Cruise control* (p. 200)
•
Cruise control* - managing speed (p. 201)
•
Cruise control* - resume set speed (p. 202)
•
Cruise control* - deactivate (p. 202)
Cruise control* - resume set speed
The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed.
After temporary deactivation and standby
mode (p. 201) it is possible to resume the set
speed.
To reactivate the cruise control from standby
mode:
•
Press the steering wheel button
.
> The combined instrument panel's
marking (5) and symbol (6) change colour
from GREY to WHITE - the car then follows
the last stored speed.
NOTE
A marked speed increase may occur once the
speed has been resumed by selecting the
button.
Related information
•
Cruise control* (p. 200)
•
Cruise control* - managing speed (p. 201)
•
Cruise control* temporary deactivation and
standby mode (p. 201)
•
Cruise control* - deactivate (p. 202)
Cruise control* - deactivate
How it is deactivated is described here.
Cruise control is switched off with the steering
wheel button (1) or by switching off the engine -
the set/stored speed is thus cleared and cannot
then be resumed with the button.
Related information
•
Cruise control* (p. 200)
•
Cruise control* - managing speed (p. 201)
•
Cruise control* temporary deactivation and
standby mode (p. 201)
•
Cruise control* - resume set speed (p. 202)
Loading ...
Loading ...
Loading ...