Loading ...
Loading ...
Loading ...
WHEELS AND TYRES
}}
361
Related information
•
Emergency puncture repair kit - location
(p. 359)
•
Emergency puncture repair (p. 359)
Emergency puncture repair -
operation
Sealing a puncture with the emergency puncture
repair kit, Temporary Mobility Kit (TMK).
Emergency puncture repair
For information on the function of the parts, see Emer-
gency puncture repair kit - overview (p. 360).
1. Set up the warning triangle and activate the
hazard warning lights if a tyre is being sealed
in a trafficked location.
If the puncture was caused by a nail or simi-
lar, allow this to remain in the tyre. It helps to
seal the hole.
2. Detach the label for maximum permitted
speed (which is fitted on one side of the
compressor) and affix it to the steering
wheel. You should not drive faster than
80 km/h (50 mph) after the emergency tyre
repair kit has been used.
3.
Check that the switch is in position 0, and
take out the electrical cable and the air hose.
4. Unscrew the orange-coloured cap from the
compressor, and unscrew the cork from the
bottle.
NOTE
Do not break the bottle's seal before use. The
seal is broken automatically when the bottle is
screwed in.
Loading ...
Loading ...
Loading ...