Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.
273
1. Check that the area behind the car is clear,
then engage reverse gear.
2. Reverse slowly and carefully without touching
the steering wheel - and no faster than
7 km/h (4 mph).
3. Keep an eye on the combined instrument
panel and be prepared to stop the car when
the graphics and text so request.
NOTE
•
Keep your hands away from the steering
wheel when the PAP function is acti-
vated.
•
Make sure that the steering wheel is not
hindered in any way and can rotate freely.
•
To achieve optimum results - wait until
the steering wheel is fully turned before
starting to drive backward/forward.
3 - Positioning
When the car has reversed into the parking
space, it must be straightened up and positioned.
1.
Engage first gear or D position, wait until the
steering wheel has been turned, then drive
slowly forwards.
2. Stop the car when the graphics and text
message so request.
3. Engage reverse gear and drive backwards
slowly until the graphics and text message
tell you to stop.
The function is deactivated automatically and the
graphics and message show that parking is com-
plete. It may be necessary for the driver to correct
the positioning. Only the driver can determine
whether the car is properly parked.
IMPORTANT
The warning distance is shorter when the
sensors are used by PAP compared with
when Park Assist uses the sensors.
Related information
•
Park Assist Pilot (PAP)* - symbols and mes-
sages (p. 275)
•
Park Assist Pilot (PAP)* - function (p. 271)
•
Park Assist Pilot (PAP)* - limitations
(p. 274)
•
Park Assist* (p. 263)
•
Park assist camera* (p. 267)
•
Park Assist Pilot (PAP)* (p. 270)
Loading ...
Loading ...
Loading ...