Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
120
Trip computer - analogue combined
instrument panel
The information from the trip computer can be
shown in the combined instrument panel and
operated with the controls on the left-hand stalk
switch and with the combined instrument panel's
menu.
Checking and settings can be made immediately
after the combined instrument panel is automati-
cally illuminated in connection with unlocking. If
none of the trip computer's controls are actuated
within approx. 30 seconds after the driver's door
has been opened then the instrument extin-
guishes, after which either key position II or
engine starting is required in order to operate the
trip computer.
NOTE
If a warning message appears when the trip
computer is used then the message must first
be acknowledged before the trip computer
can be reactivated.
•
Acknowledge the message by briefly
pressing the indicator stalk OK button.
Controls
Information display and controls.
OK - opens the combined instrument panel's
menu, confirms messages or menu selec-
tions.
Thumbwheel - browses between menu
options or trip computer options.
RESET - resets the current trip meter or
goes back out of the menu structure.
Trip comp. opt.
Choose which trip computer should be shown:
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Turn the thumbwheel to browse between the
options and stop at the required heading.
The trip computer display in the combined instru-
ment panel can be shifted to another option at
any time during the journey. One of the options
means that no trip computer is shown.
Trip computer heading in combined instrument panel Information
Trip meter T1 and total dist.
•
Long press on RESET resets trip meter T1.
Trip meter T2 and total dist.
•
Long press on RESET resets trip meter T2.
Loading ...
Loading ...
Loading ...