Loading ...
Loading ...
Loading ...
LOADING AND STORAGE
}}
* Option/accessory, for more information, see Introduction.
161
Safety grille
A safety grille prevents loads or pets from being
thrown forward in the passenger compartment in
the event of sudden braking.
Folding up
Take hold of the bottom of the safety grille and
pull back/up.
IMPORTANT
The protective grille cannot be folded up or
down when a cargo cover is fitted.
Fitting/removal
The safety grille is normally permanently installed
in the car because it can easily be folded up in
the roof and so be out of the way if a longer
cargo area is required. However, if desired, the
safety grille can be dismantled and removed from
the car.
For information about the tools required and
methods for fitting/removal, see the installation
instructions
3
that were included with the initial
purchase.
For safety reasons, the safety grille must always
be correctly fastened and secured when being
refitted.
Related information
•
Safety net* (p. 159)
•
Loading (p. 156)
•
Load retaining eyelets (p. 158)
Cargo cover
Pull the cargo cover over the load and hook it
into the recesses at the cargo area's rear posts.
IMPORTANT
The protective grille cannot be folded up or
down when the cargo cover is fitted.
Attaching the cargo cover
Move one end piece of the cover into the
recess on the side panel.
Move the other end piece into the corres-
ponding recess.
Press both sides in. A "click" should be audi-
ble and the red marking should disappear.
> Check that both end pieces are locked.
3
Installation instructions no. 30756681.
Loading ...
Loading ...
Loading ...